How do you finance sawmill equipment?
Sawmill equipment financing works like most equipment deals: a funder pays the seller, and your company makes a fixed monthly payment with the machine as collateral. Below is what mills, headrigs and edgers were listing for in November 2026, what those prices come to each month, and what to do when a small portable mill comes in under our minimum.
On this page
How does sawmill financing work?
You pick the mill, we pay the seller, and your company pays a fixed amount each month. With an equipment finance agreement (EFA), the mill belongs to you, with a lien on it until the last payment. Terms go from 24 to 84 months. A lease goes from 24 to 60 months, and the buyout at the end is $1, 10% or fair market value.
Where your deal lands inside those ranges depends on the machine, its condition, your credit and how long you’ve been in business. Many programs start around a 600 FICO, and two or more years in business opens up the most options.
Speed matters when somebody else is looking at the same used headrig. Most applicants hear from us within 1 to 2 business hours. A clean file can get approved in as little as 30 minutes, and the seller can be paid in as little as 24 to 48 hours once documents are signed.
Five West finances sawmill equipment: band mills, headrigs, edgers, resaws, debarkers, kilns and the loaders that feed them. Our forestry equipment financing page covers the woods side, and manufacturing equipment financing covers production equipment and forklifts.
How much does a sawmill cost in 2026?
From about $27,000 for a nearly new portable band mill to $100,000 for a stationary production mill, going by the listings we checked. Support equipment runs from a few thousand dollars to more than the mill itself:
| Equipment | Example listing | Listed price | Listed in |
|---|---|---|---|
| Portable band mill | 2022 Hud-Son Oscar 52-37, 37 hp EFI, 24-foot track, listed with 11.5 hours | $26,999 | Salem, IL |
| Hydraulic portable band mill | Used Baker 3665D, 65 hp diesel, 305 hours, trailer package | $80,375 | Ellington, MO |
| Stationary band mill | 2019 Select 4221-E, log deck not included | $100,000 | Fairview, MI |
| Vertical band headrig | Smicksburg, line-shaft ready, spare parts included | $15,000 | Not stated |
| Board edger | Crosby, 6 x 32 inch capacity, 4 blades | $10,500 | Not stated |
| Board edger | Cornell HE42, 6 x 42 inch capacity, electric drive | $17,250 | Wolcottville, IN |
Listed asking prices we found, checked November 16, 2026, not appraisals or offers. Most rows are used equipment, each one is a single listing, and all are linked in Sources.
Two things stand out. The used Smicksburg headrig lists for less than the nearly new Oscar portable. And plenty of circular rigs and larger edgers on the same site said “call for price,” so the table leans toward what sellers were willing to post.
Forklifts are the other big line item at a mill or lumber yard. Our forklift financing guide covers new and used prices.
What’s the monthly payment on sawmill equipment?
Four examples from that table, with the whole price financed by an established business:
| Example amount | 36 months | 48 months | 60 months |
|---|---|---|---|
| $37,499: Oscar mill plus Crosby edger | $1,192 | $933 | $778 |
| $17,250: Cornell HE42 edger | $549 | $429 | $358 |
| $100,000: Select 4221-E band mill | $3,180 | $2,489 | $2,076 |
| $80,375: Baker 3665D | $2,556 | $2,000 | $1,668 |
Estimated examples, not quotes, on an EFA with no down payment, for a company with two or more years in business. Your actual payment depends on credit, the equipment and the term.
I’d work this backward from your board feet. Take the monthly payment, divide by what you clear per thousand after logs and labor, and you’ve got the extra footage the machine has to pay for each month. If that number looks tight on a normal month, try a longer term or a cheaper machine before you sign. You can try your own numbers in the Quote Builder without a credit pull.
Can a small mill or edger reach the $15,000 minimum?
Not by itself, usually. Our usual minimum is about $15,000, and some small portable mills and single machines come in under it, like the $10,500 Crosby edger in the table. The good news is the minimum counts on the whole bundle, so what you need is a second piece that earns its keep.
For a one-person mill, the natural pairings are a mill with an edger, a log loader or a trailer. The Oscar portable and the Crosby edger together make $37,499, or about $933 a month over 48 months. That’s an estimate for an established business making no down payment. A smaller mill works the same way: put it on the same agreement as the edger or loader you were going to buy anyway.
Buying from more than one seller? Send each seller’s quote up front and ask us whether they can share one agreement. If you’d finance one piece and lease another, that takes two agreements, but the $15,000 minimum is still measured on the combined total.
Can you finance a lumber kiln?
Yes, when it’s bought as a piece of equipment. A production kiln usually clears the $15,000 minimum on its own, and bought with a mill it can usually share the agreement. If the kiln will be built into a building, ask us first.
Here’s a small commercial example: the Baker 3665D and the Cornell edger total $97,625. Spread over 60 months, an established business would pay about $2,027 a month with no down payment. A kiln quote would add to that.
Kiln quotes can carry more than the kiln. Soft costs like delivery, installation, training and warranties can go on the quote, usually around 20% of the equipment amount, depending on credit and collateral. Concrete, a building or power work to the site aren’t on that list, so ask before you count on them. Kiln prices vary a lot by size and type, and we didn’t find a public listing we could confirm this week, so get a written quote.
Should a sawmill lease or finance equipment?
I’d finance a mill you plan to keep, since you own it from the start and terms can reach 84 months. Our forestry page says most owners do that with mulchers and loaders, and I think the same logic carries over to a well-kept band mill, kiln or edger.
A lease makes more sense in a narrower spot. A $1 or 10% buyout lease still ends with you owning the machine if you pay the buyout. With a fair market value lease, the payment usually drops, and you can buy it at market value or hand it back when the term ends. Think of a machine you only need for a two- or three-year contract, like a resaw tied to one pallet customer.
Putting a machine in service by December 31? On an EFA or a $1 buyout lease, Section 179 may make it fully deductible in year one. That’s a question for your CPA, and you can bring a rough figure from our Section 179 calculator.
If your mill slows down when logs stop coming in, tell us how your revenue arrives. Seasonal or skip payments are available on many forestry programs, so it’s worth asking whether one fits your deal.
Can you finance used sawmill equipment?
Usually, yes, and most of the table above is used. New and used equipment both work, from a dealer, an auction or a private seller, including another mill that’s closing or upgrading. There is no age limit, though older equipment can be tougher to get done. Older or used equipment typically gets a shorter term than new.
We don’t set a maximum hour reading either. Hours, condition and records all feed the term, so an older headrig with a box of spare parts is still worth sending in. With good credit, you usually don’t need a down payment, even on used equipment or a private-party sale.
Private sale? The lien search and any inspection are part of the file, and the money goes straight to the seller. If they still owe on the mill, their lender gets paid off at closing, the lien comes off, and the seller gets what’s left. Mills often come with extras, so write out which conveyors, decks and spare parts are in the deal. An attorney should read the bill of sale before you sign it. Our guide on checking used equipment for liens shows what to run first.
Buying at auction? I’d get the application in before the sale, so you know your number before you bid.
Can a startup sawmill get equipment financing?
Sometimes. Under a year in business, your own credit and background do most of the work. The programs we place these deals with typically look for 700+ personal credit, real time spent in sawmilling, logging or a lumber yard, cash still in the bank after the purchase, and usually a down payment.
A well-known mill that’s easy to resell helps your file. There’s more in our startup financing guide.
What should you send with a sawmill application?
The faster we can see the machine, the faster we can answer. Attach:
- A quote or listing for each piece going on the deal.
- Serial numbers and meter readings on used machines, with any repair records.
- The seller’s contact details, so a lien search can begin.
- Delivery and setup costs, so they can be looked at with the equipment.
- Your slow months, if you want to ask about a seasonal structure.
You’ll deal with the same funding professional the whole way, and you can look up where things stand on the status page. I work in operations, so I’ll say it plainly: a clean file with the right serial numbers moves faster.
Frequently asked questions
Can I finance a portable sawmill?
Usually, when the agreement comes to about $15,000 or more, which is the usual minimum. A small portable mill can fall under that. If yours does, add an edger, a log loader or a trailer so the whole bundle reaches it, and you get one agreement and one payment.
How much does a sawmill cost?
In the listings we checked on November 16, 2026, band mills ran from $26,999 for a nearly new portable to $100,000 for a stationary production mill. Those are asking prices, not appraisals or offers, and many larger machines don't post a price at all.
How long can you finance sawmill equipment?
Equipment finance agreements run 24 to 84 months and leases run 24 to 60 months. Your term depends on the machine, its condition and your credit. Older or used equipment typically gets a shorter term than new.
Can I finance used sawmill equipment?
Usually, yes, from a dealer, an auction or a private seller. There is no age limit, though older equipment can be tougher to get done. Send serial numbers, hour readings and any service records with your application.
Can a kiln go on the same agreement as the mill?
Usually, as long as both are financed the same way and the kiln is bought as a piece of equipment. Several pieces can share one agreement and one payment. Ask first on a kiln built into a building. A financed piece and a leased piece need two agreements, though the $15,000 minimum counts on the total.
Do I need a down payment for sawmill equipment?
With good credit, you usually don't need a down payment, even on used equipment or a private-party sale. Startups usually make a down payment.
Got a mill or kiln picked out?
Send the listing with one short application. A soft credit inquiry starts it, and a dedicated funding professional takes it from there to funding.
This article is general information about financing sawmill, kiln and lumber yard equipment, not tax, legal or accounting advice or a commitment to finance. Prices shown are listed asking prices from public pages on the date checked, not appraisals or offers. Example payments are estimates for an established business with no down payment; actual terms and payments depend on credit approval, the equipment and the structure. All financing is subject to credit approval and underwriting.