Dedicated Advisors Free Consultation, No Obligation Same-Day Options for Qualified Files 10+ Years Experience Nationwide plus U.S. Territories Commercial Finance Specialists Multiple Funding Programs
Five West Financial
Wineries

How do wineries finance winemaking equipment?

Most wineries finance winemaking equipment with an equipment finance agreement or a lease: Five West pays the seller, and the winery pays monthly over the term, with the press, tanks or bottling line as the collateral. That works for new gear from a maker and for used gear bought from another winery. Below are real asking prices, what they come to a month, and how to time it all around crush.

On this page

What winery equipment can you finance?

Anything that turns grapes into finished, labeled bottles. A winery is a production plant with a short, intense busy season, so we handle it the same way we handle other plants under manufacturing equipment financing. Here’s what wineries usually ask about:

  • Crush pad: destemmer-crushers, receiving hoppers and conveyors, and must pumps.
  • Presses: pneumatic membrane presses, from small basket units up to large closed-tank presses.
  • Tanks: stainless fermentation and storage tanks, jacketed or not, fixed or variable capacity.
  • Temperature control: glycol chillers and the piping that runs to the tank jackets.
  • Cellar work: wine pumps, plate and crossflow filters, and lab gear for testing.
  • Packaging: bottling lines, fillers, corkers and cappers, and labelers.
  • Moving cases and bins: forklifts and pallet jacks. See our forklift financing guide.

If you brew beer or cider under the same roof, our brewery equipment financing guide covers the brewhouse side.

How much does winery equipment cost?

Everything from a couple thousand dollars to six figures. Wineries sell gear to each other all the time, and grape grower and winery associations run classifieds for it. Here are asking prices we found on two of them:

EquipmentListed asking priceDetails from the listing
Destemmer-crusher (Lugana 1)$1,850 or best offerThree-phase; seller says it handles several tons per hour. Listed November 10, 2026.
Membrane press (Europress EHP 3000)$42,000Factory refurbished with a 2022 electronics package, new membrane, two seasons of use. Listed October 12, 2026.
Crossflow filter (Romfil XF-W 2)$69,000Used for one harvest; up to 660 gallons per hour. Listed November 9, 2026.
Bottling line (Costral Galaxy 2000)$210,000Rinser, 11-spout filler, corker and capper, labeler; bought in 2021. Listed November 9, 2026.

Listed asking prices we found on grape and wine association classifieds, checked November 16, 2026, not appraisals or offers. Sellers can change or pull a listing at any time.

A few things jump out. The destemmer is cheap enough that it would fall under our usual $15,000 minimum by itself, so it’s the kind of piece that rides along with something bigger. The filter costs more than the press. And the bottling line is the biggest single check on the list by a wide margin.

Tanks and glycol chillers are mostly sold by quote, sized to your cellar. Ask the maker or seller for an itemized quote, with delivery and installation listed apart from the equipment.

What are the monthly payments on a wine press or filter?

Here’s what three of those asking prices could come to for an established winery:

Equipment price36 months48 months60 months
$42,000: membrane press$1,336$1,045$872
$69,000: crossflow filter$2,194$1,717$1,432
$210,000: bottling line$6,678$5,226$4,359

Estimated payments for a winery with two or more years in business, financing the full asking price on an equipment finance agreement with no down payment, before tax and delivery. Your actual payment depends on credit, the equipment and the term.

I stopped the table at 60 months because these are used pieces, and used equipment typically gets a shorter term than new. New equipment from a maker can go out as far as 84 months. Take the bottling line: at $4,359 a month, it’s worth asking how many cases you’d need to run each month to cover it, before you sign anything. The Quote Builder lets you try other amounts and terms with no credit pull.

Section 179 may let a winery deduct qualifying equipment in the year it’s put in service. Ask your CPA how that works on your return.

When should a winery line up financing before harvest?

Well before the fruit comes in. Makers’ lead times on tanks and presses can run long, and a used press that a neighbor is selling in August won’t sit there through September. So get approved first, then shop with the approval in hand.

On a clean file, an approval can come in as little as 30 minutes. Approvals stay open for a set time, which gives you room to settle on the exact piece. Once the documents are signed, funding can follow in as little as 24 to 48 hours. That pace matters most in the weeks right before crush, when everybody is short on time.

On a full bottling line, line builders often ask for a deposit when you order and more at milestones. Progress and pre-funding can cover those deposits while the equipment is being built. Send the maker’s payment schedule with your application so underwriting can see what’s due when.

Should a winery lease or finance its equipment?

For stainless and presses, I’d usually finance and own. Tanks and presses are long-lived, and a press holds its value well enough that wineries resell them, as the table shows. An equipment finance agreement makes you the owner from the first day, with a lien until the last payment, on terms of 24 to 84 months.

An equipment lease runs 24 to 60 months with a $1, 10% or fair market value buyout. The fair market value version has the lowest payment, and at the end you can buy it at what it’s worth then, extend, upgrade or hand it back. That can suit gear you expect to outgrow, like a small filler you plan to replace once case volume climbs.

Want to own the tanks and lease the filler? That works, though it takes two agreements, one for each structure.

Pieces bought together on one invoice can go on one agreement with one payment, and the usual $15,000 minimum counts against the whole bundle. That’s how a $1,850 destemmer gets financed. If the pieces come from different sellers, ask us how to set it up. Delivery, installation, training and warranties can be added too, installation and training on qualifying transactions. Together they usually run around 20% of the equipment amount, depending on credit and collateral.

Can you finance used equipment from another winery?

Yes, and every listing in the table above is exactly that kind of sale. Five West finances used winery equipment from dealers, auctions and other wineries. There is no age limit, though older equipment can be tougher to get done. Older or used equipment typically gets a shorter term, and the maker, condition and service history all count.

On a private-party deal, a lien search and, on bigger items, an inspection are part of the file. The money goes to the seller directly. If the seller still owes on the press or tanks, we pay off their lender at closing so the lien is released, and the rest goes to the seller. The speed doesn’t change: approvals in as little as 30 minutes on a clean file and funding in as little as 24 to 48 hours after signing.

With good credit, you usually don’t need a down payment, even on used equipment or a private-party sale.

Before you pay, get the serial numbers and nameplate photos, and have an attorney look over the bill of sale. Our guide to checking used equipment for liens walks through what to ask.

Should a winery buy its own bottling line?

It depends on volume and how much control you want over timing. Plenty of smaller wineries hire a mobile bottler a few days a year. Others reach the point where scheduling around a truck costs them more than a payment would, and they buy a line. The Costral listing above is a compact line that one seller says a three-person crew ran at 400 to 500 cases a day.

Bottling and labeling machines also come under our packaging equipment financing. On a packaging line, the first payment can be deferred until the line is running. For a full line from filler to pallet, see our packaging line financing guide.

Can a winery get cash out of tanks and presses it owns?

Often, yes, with an equipment leaseback. If the winery owns serialized tanks or a press with a resale market free and clear, it can pledge them as collateral and receive a lump sum against their value. You still own them and keep making wine on them. The lien comes off when the balance is paid.

It’s structured as an equipment finance agreement, on terms up to 60 months, and the program generally looks for 600+ credit and two or more years in business. Funds typically go out 2 to 5 business days after signing, once the value is confirmed. Proceeds are unrestricted, so the money can go to grape payments, payroll in the slow months or paying down costlier short-term debt.

Can a new winery get equipment financing?

Yes, selectively. For startups, the programs we place these deals with usually want 700+ personal credit and real winemaking experience, such as years as a winemaker or cellar master somewhere else. Most new wineries make a down payment and need to show cash left in the account after the purchase. Equipment with a resale market helps the file.

Permits matter too. TTB says anyone who will produce or blend wine for commercial purposes must qualify for a federal basic permit, and wineries qualify as a bonded winery before they start. Your state will have its own license, and an attorney can help with that side. Tell us where your permits stand when you apply. Our startup equipment financing guide covers the rest.

How do you pay for the winery building or tasting room?

Through an SBA loan, since buildings and land aren’t equipment. Five West places SBA 7(a) and 504 loans, starting at $150,000 for a 7(a) with us, and SBA says 504 loans can cover buying, building or renovating buildings and land. SBA sets no minimum credit score, but the lenders that underwrite SBA loans usually want 650 or higher. We package the file and manage it to closing. A complete file usually closes in 45 to 90 days, sometimes longer. See SBA loans for the details.

Frequently asked questions

Can you finance wine tanks?

Yes. Stainless fermentation and storage tanks, jacketed or not, can be financed new from a maker or used from another winery. Tanks bought together on one invoice can go on one agreement with one payment.

How long can you finance winery equipment?

Equipment finance agreements run 24 to 84 months and leases run 24 to 60 months, with a $1, 10% or fair market value buyout. Used equipment typically gets a shorter term than new.

Can a small piece like a destemmer be financed?

Yes, as part of a bigger bundle. The usual $15,000 minimum counts against everything bought together on one invoice, so a destemmer can go on the same agreement as a press or tanks.

Does a winery need a down payment for equipment financing?

With good credit, you usually don’t need a down payment, even on used equipment or a private-party sale. A new winery usually makes a down payment.

Can I buy a used press from another winery with financing?

Yes. Five West runs a lien search, pays the seller directly, and pays off the seller’s lender at closing if the press still has a loan on it. There is no age limit, though older equipment can be tougher to get done.

Can installation and delivery be included?

Yes. Delivery, installation, training and warranties can be included, installation and training on qualifying transactions. The added amount usually runs around 20% of the equipment amount, depending on credit and collateral.

Can equipment financing pay for a tasting room?

No. Buildings and land are not equipment. A winery building or tasting room can be an SBA 7(a) or 504 conversation, and Five West places both.

Ready to price your winery equipment?

Send the quote or the listing with one short application, and one funding professional takes it from there.

This article is general information about financing winery production equipment, not tax, legal or accounting advice or a commitment to finance. Prices shown are asking prices from classified listings on the date checked, not appraisals or offers. Example payments are estimates for an established business with no down payment; actual terms and payments depend on credit approval, the equipment and the structure. All financing is subject to credit approval and underwriting.

Get a quoteApply