How do scrap yards finance balers, shears and material handlers?
Most scrap yards finance balers, shears, material handlers and truck scales with an equipment finance agreement or a lease: Five West pays the seller, and the yard makes a monthly payment with the machine as the collateral. It works for new equipment from a dealer and for used equipment bought from another yard. Below are real prices from public purchase records, what they come to a month, and how a full yard buildout gets put together.
On this page
What scrap yard equipment can you finance?
Pretty much everything that moves, cuts, crushes or weighs metal in the yard. Scrap yard machines sit closest to our material handling equipment financing. Here’s what yards usually ask about:
- Material handlers: wheeled or tracked machines with a grapple or a lifting magnet, often with a raised cab so the operator can see into a trailer or a pile.
- Baler-loggers and car crushers: for flattening cars and bundling light iron.
- Shears: alligator and guillotine shears, plus mobile shears that mount on an excavator. The excavator itself falls under our construction equipment financing.
- Horizontal balers: the kind recycling centers use for lighter material.
- Wheel loaders and skid steers: for pushing piles and loading out.
- Truck scales: with the indicator for the scale house.
- Magnets, grapples and generator sets: the gear that goes on the handler.
- Roll-off trucks: covered in our roll-off truck financing guide.
How much do balers, material handlers and truck scales cost?
Anywhere from under $100,000 for a loader or a scale to about half a million for a big handler or baler. Counties and cities buy some of the same machines for recycling centers, highway yards and airports, and they publish what they pay. Here are four purchases from three of them:
| Equipment | Price in the public record | Details from the record |
|---|---|---|
| Material handler (Caterpillar MH3024) | $497,200 (rounded from $497,199.56) | Marion County, Oregon, purchase order for its North Marion Recycling and Transfer Station, replacing a backhoe. Set for the county board session of February 21, 2024. |
| Horizontal single-stream recycling baler (county recycling center; spec: American 8043HS, dual 75 HP) | $495,800 | Awarded value, Outagamie County, Wisconsin, recycling center: a baler for recyclables, not a scrap-metal baler-logger. Covers removing the old baler and installing the new one, and may include a spare-parts package. Bids closed February 2025. |
| Truck scale (40 by 11 feet, 90-ton) | $96,541 | Outagamie County low bid, awarded, for an above-ground scale at a new highway facility, installed and tested, with training. The other bid was $136,260. Bids closed July 28, 2026. |
| Skid steer with bucket and snow blower | $89,355 | Low bid of seven listed, on the Savannah, Georgia, city council agenda for October 23, 2025, paid from airport funds. |
Prices from public records, checked November 17, 2026. They’re what each public body awarded or put up for approval on the date shown, not current quotes, and a public bid can include work a private yard would buy separately.
Shears, car crushers and baler-loggers usually get priced one yard at a time, based on your volume and your power supply, so we didn’t find a clean public number to print. Ask for an itemized quote. It makes the paperwork on our end simpler too.
What are the monthly payments on scrap yard equipment?
Here’s what those four prices could come to for an established yard:
| Equipment price | 48 months | 60 months | 84 months |
|---|---|---|---|
| $89,355: skid steer | $2,224 | $1,855 | $1,438 |
| $96,541: truck scale | $2,402 | $2,004 | $1,553 |
| $495,800: horizontal recycling baler | $12,338 | $10,292 | $7,977 |
| $497,200: material handler | $12,373 | $10,321 | $7,999 |
Estimates for a yard that has been open two years or longer, with the whole price on an equipment finance agreement and no down payment, before tax and delivery. What you’d actually pay depends on credit, the equipment and the term.
Those are new-machine numbers, which is why the table runs out to 84 months. A used baler or handler typically gets a shorter term. You can run your own numbers in the Quote Builder, and it doesn’t pull credit.
Depending on your return, Section 179 might let you write off qualifying yard equipment in the year it starts working. That’s a question for your CPA.
Should a scrap yard lease or buy its equipment?
For the heavy stuff, I’d usually finance and own. A material handler, a baler or a scale is built to run for years. On an equipment finance agreement, the machine is yours from the first payment, the lien comes off after the last one, and terms run 24 to 84 months.
An equipment lease goes 24 to 60 months, and you pick a $1, 10% or fair market value buyout up front. Fair market value keeps the payment lowest. When the term ends you can buy the machine for what it’s worth at that point, keep leasing it, trade up, or give it back. That can fit a loader you plan to replace on a schedule.
Want to own the baler and lease the loader? Fine. Those go on two separate agreements.
When everything is on one invoice from one seller, it can all sit on a single agreement with a single payment, and our usual $15,000 minimum is measured against the total. So a magnet, a grapple and a generator set can ride along with the handler they work on. Buying from two or three sellers? Ask us, and we’ll tell you how it can be set up. Delivery, installation, training and warranties can go on as well (installation and training on qualifying transactions), and the added amount usually lands around 20% of the equipment amount, depending on credit and collateral.
Can you finance a used baler or shear from another yard?
Yes. Five West finances used scrap equipment from dealers, auctions and other yards. There is no age limit, though older equipment can be tougher to get done. A used machine typically gets a shorter term than a new one, and hours, condition and service records weigh in. Send the hour meter reading and recent repair invoices with the listing. Our guide on how many hours is too many goes through what to look at.
Buying straight from another yard? We run a lien search, and bigger pieces usually get an inspection. Payment goes to the selling yard, not through you. If that yard still has a loan on the baler or shear, the payoff goes to its lender at closing, the lien gets released, and the balance goes to the seller. A private sale moves at the same speed as a dealer sale: approvals in as little as 30 minutes on a clean file and funding in as little as 24 to 48 hours once documents are signed.
With good credit, you usually don’t need a down payment, and that holds for a used machine from another yard too.
Before any money changes hands, get serial numbers and nameplate photos, and ask an attorney to read the bill of sale and any agreement about moving the machine off the seller’s property. For the rest of the checklist, see how to check used equipment for liens.
How do you finance a yard buildout over $1 million?
As one project, if the company is big enough. Add up the four rows in the price table and you’re at about $1.18 million before a shear or a second loader. For companies with $10 million or more in annual revenue, large-ticket equipment financing covers $1 million to $10 million and up per transaction. It’s reviewed on your financial statements, and it can include progress funding for equipment with long lead times, seasonal or step payments, and one master agreement you add equipment to as each piece arrives.
Under $1 million, or under that revenue size, the standard application is the faster way in. A handler and a scale bought from one dealer can still go on one agreement.
Can a scrap yard get cash out of equipment it owns?
Often, yes, through an equipment leaseback. A yard that owns a material handler, a loader or a baler free and clear can pledge it as collateral and get a lump sum against its value. Ownership stays with you, the machine keeps working, and the lien is released once you’ve paid the balance.
Behind the scenes it’s an equipment finance agreement, up to 60 months. The program generally wants 600+ credit and at least two years in business. Expect the funds 2 to 5 business days after signing, once the equipment’s value is confirmed. How you use the money is up to you.
What does a scrap yard need to qualify?
For an established yard, many of the programs we place these deals with start around a 600 FICO, with two or more years in business and cash flow that covers the payment. Bank statements often matter as much as the score on a bigger deal. Equipment with a strong resale market, like a material handler or a wheel loader from a recognized brand, helps the file.
You get one funding professional from application to funding, and the team averages about 10 years of experience. If a file isn’t ready, we’ll say so. You can check where your application stands on the online status page. See our qualification guidelines for the full list.
Can a new scrap yard get financed?
It’s possible, and it comes down to the owner. Startup files through the programs we place these deals with typically need 700+ personal credit and hands-on time in the trade, like years running a yard, a scale house or a processing line for someone else. Expect to put a down payment on the deal and to have cash left in the account once it closes. A machine that’s easy to resell makes the file stronger. More in our startup equipment financing guide.
What about the yard land and buildings?
Land and buildings fall outside equipment financing, so that part can be an SBA loan conversation. We place both SBA 7(a) and 504 loans; a 7(a) with Five West starts at $150,000, and per SBA, a 504 loan can pay to buy, build or renovate buildings and land. SBA has no credit score floor of its own, though the lenders that underwrite SBA loans usually want 650 or higher. We put the file together and stay on it through closing, which usually takes 45 to 90 days for a complete file and can run longer. The details are on our SBA loans page.
Frequently asked questions
Can you finance a material handler for a scrap yard?
Yes. Wheeled and tracked material handlers can be financed new or used, along with the grapple, magnet and generator that go with them when they’re on the same invoice.
How long can you finance a scrap baler?
Equipment finance agreements run 24 to 84 months and leases run 24 to 60 months, with a $1, 10% or fair market value buyout. Used equipment typically gets a shorter term than new.
Can a truck scale be financed?
Yes. A truck scale and its indicator can be financed, and installation can be added on qualifying transactions. A scale bought with other yard equipment on one invoice can go on the same agreement.
Does a scrap yard need a down payment?
With good credit, you usually don’t need a down payment, even on used equipment or a private-party sale. A new yard usually makes a down payment.
Can I buy a used shear from another scrap yard?
Yes. Five West runs a lien search, pays the seller directly, and pays off the seller’s lender at closing if the shear still has a loan on it. There is no age limit, though older equipment can be tougher to get done.
Can equipment financing pay for yard land?
No. Land and buildings are not equipment. Yard land and buildings can be an SBA 7(a) or 504 conversation, and Five West places both.
Ready to price your yard equipment?
Send the quote or the listing with one short application, and one funding professional takes it from there.
This article is general information about financing scrap yard and metal recycling equipment, not tax, legal or accounting advice or a commitment to finance. Prices shown are amounts from public purchase records on the dates shown, not appraisals or offers. Example payments are estimates for an established business with no down payment; actual terms and payments depend on credit approval, the equipment and the structure. All financing is subject to credit approval and underwriting.