Dedicated Advisors Free Consultation, No Obligation Same-Day Options for Qualified Files 10+ Years Experience Nationwide plus U.S. Territories Commercial Finance Specialists Multiple Funding Programs
Five West Financial
CNC machining & machine shops

Can a machine shop use a leaseback to take on a big order?

Yes, a machine shop can use an equipment leaseback to fund a big order. If you own your CNC machines free and clear, Five West can turn them into working capital for the material, tooling, overtime and inspection time a large machining contract eats up before the customer pays. You pledge the machines, a lien is filed and later released when the balance is paid, and the machines stay on your floor making the parts.

On this page

Why does a big machining order need cash before it pays?

Because a lot of the cost comes before the customer pays anything. Land a large contract, or a blanket PO with scheduled releases, and the spending often starts the week the paperwork is signed. The first check from the customer might be months away. Here’s where the money tends to go:

  • Material: bar stock, plate, castings or forgings for the first few releases. On a big job, the material buy can be the largest single check you write.
  • Cutting tools and workholding: inserts, end mills, drills and toolholders, plus vises and the fixtures or soft jaws made for the part.
  • Programming and prove-out: CAM hours, setups, and the scrap you make dialing in the first good parts.
  • First-article inspection: many aerospace, medical and defense customers want the first parts measured and documented before they release production. That’s CMM and inspector time you carry yourself.
  • Labor: overtime, a second shift, or both, to hit the delivery dates.

Labor is the line I think owners underestimate. Under federal law, covered non-exempt employees get at least time and a half for hours past 40 in a workweek, and the Bureau of Labor Statistics says overtime, nights and weekends may be common for machinists. A few weeks of that during a ramp-up adds up fast.

Usually nothing comes back until parts ship, pass the customer’s inspection and the invoice gets paid. Our cash-flow guide for CNC shops covers the everyday version of this. A big order is the same squeeze, all at once.

How does a leaseback fund a large machining contract?

You borrow against machines you already own and spend the lump sum on the order. With a Five West leaseback, your business pledges equipment it owns free and clear as collateral and gets a lump sum against its value, on an Equipment Finance Agreement. A lien is filed against the pledged machines and released when the balance is paid.

Unlike a sale-leaseback, you stay the owner the whole time, and the machines remain on your books. So the spindles you pledge can be the same ones cutting parts for the new contract.

There are no strings on the money. Our equipment leaseback page lists mobilizing for a job that pays later and buying materials among the common uses, and a big order is both. You repay it monthly over up to 60 months.

Machine tools and manufacturing equipment are both on our eligible list, and our machine tool financing page points to paid-off machining centers, EDMs and grinders. The excluded categories are Class 8 sleepers, forestry equipment and commercial printers, and those can often be financed through a purchase or refinance. Our equipment leaseback explainer walks through each step.

How much working capital should you raise for a big order?

Enough to cover the gap, plus a cushion. Not the most your machines will support.

Here’s how I’d size it. Put every up-front cost on a calendar by week, up to the day the first customer payment lands. Subtract what you can spend from cash on hand without running the business thin. Then add a cushion for the things that slip: a late first payment, a rejected first batch, a material price that moved after you quoted.

Why not take the maximum? Every extra dollar raises the payment for the whole term, on money the order doesn’t need.

On our side, the amount comes from the machines’ resale-market value and your credit file, so there’s no set figure until we see the list. The final number comes from an inspection or appraisal, and the whole schedule is valued together. Seen leaseback amounts quoted as a share of value? Our tool and die leaseback guide explains why those figures swing with the value standard.

What does a big-order leaseback look like in numbers?

Here’s a hypothetical example, not a real customer or deal. An established job shop wins a $520,000 order for machined aluminum and stainless housings, shipping in releases over eight months. The first customer payment is expected around week 16. These are the costs the shop pays before then:

Up-front cost (hypothetical)AmountWhen the shop pays it
Bar stock and plate for the first three releases$74,000Weeks 1 to 3
Cutting tools, inserts and toolholders$18,000Weeks 1 to 2
Fixtures and workholding for the part family$22,000Weeks 2 to 5
Programming, prove-out and first-article inspection$11,000Weeks 3 to 6
Overtime and a partial second shift$40,000Weeks 4 to 14
Total before the first customer payment$165,000By week 14

Hypothetical order for illustration only, not a Five West customer, application or deal. Your own costs and timing will be different.

That’s $165,000 out the door before anything comes in. Say the shop is comfortable putting in $40,000 of its own cash, which leaves a gap of $125,000. Add a $15,000 cushion and it raises $140,000 against its paid-off machining centers and lathes, even if the appraisal shows the machines could support more.

On $140,000, the estimate is about $4,501 a month over 36 months, $3,534 over 48 or $2,957 over 60. Here’s the same order sized three ways:

Lump sum raised36 months48 months60 months
$125,000: the gap alone$4,019$3,155$2,641
$140,000: gap plus cushion (the example)$4,501$3,534$2,957
$200,000: more than the order needs$6,430$5,049$4,225

Estimated payments for an established business, two or more years in business, on an Equipment Finance Agreement, before taxes. Examples only; actual payments depend on credit, the equipment and the term.

Look at the last row. The extra $60,000 adds about $1,268 to every payment on the 60-month term, for money the order never needed.

Which term would I pick? The one the shop can still carry if the customer’s first payment shows up a month late. Run your own numbers in the Quote Builder, with no credit pull.

How fast can a leaseback fund before production starts?

Within days of signing, usually. The appraisal and paperwork usually set the pace, though, so start before you need the money.

Most applications get a first response within 1 to 2 business hours. Once the documents are signed and the machines’ value is confirmed, the money typically lands 2 to 5 business days later. A third-party appraisal is usually the longest step, and a ready equipment list speeds things up.

My advice: send the machine list while you’re still quoting the job, not the day the PO shows up. For each machine, give us the year, make, model and serial number, plus the control if you know it. An insurance or depreciation schedule works as the list.

One funding professional stays with your file from application to funding, and you can see where your application stands on our status page. If something isn’t ready, we’ll say so.

Can you pay the leaseback off when the customer pays?

Yes. Most approvals carry no early payoff penalty, so once the order’s payments are coming in, you can pay off the balance, and the lien on your machines is released.

So I’d lean toward a payment that’s easy to carry while the material and labor are out the door. If the order pays the way you planned, ask us for a payoff figure and pay it off. If it turns into steady repeat work instead, just keep making the monthly payment. Nothing forces an early payoff.

When doesn’t a leaseback make sense for a big order?

When the gap is short, when the machines aren’t free and clear, or when the order itself doesn’t work.

  • The customer’s payment is days away. A leaseback is a lot of structure for a gap that closes next week. If cash on hand covers it, use that.
  • You still owe on the machines. A leaseback needs equipment that’s fully paid off with no liens. If there’s a balance, ask us about a refinance instead; it may be the better route.
  • The margin can’t carry the payment. If the job is priced so tight that the payment eats the profit, raising money won’t fix the price.
  • You can’t staff it. Money can pay for a second shift. It can’t hire one.

Before you commit, have your attorney read the customer’s contract: delivery dates, late-delivery penalties, whether the customer can cancel open releases, and who owns the fixtures and tooling you build for the job. Talk with your CPA too. Borrowing against machines under an Equipment Finance Agreement isn’t a sale, so it creates no gain on the equipment, and the machines remain on your books. Ask them how the payments get treated.

Who does equipment leasebacks for machine shops?

Five West Financial does, for established machine shops nationwide. We’re a commercial finance company based in Tempe, Arizona.

Here’s what you get with us. A first response typically within 1 to 2 business hours. One funding professional from application to funding. Straight answers about what your machines will and won’t support, from a team with about 10 years of experience on average. And the machines never leave your floor.

Qualifying is about the business as much as the machines: two or more years in business, good credit, and cash flow that covers the payment. The details are in our qualification guidelines.

Frequently asked questions

Can I use a leaseback to buy material for a big order?

Yes. Proceeds from a Five West equipment leaseback are unrestricted, so the lump sum can pay for bar stock, tooling, fixtures, inspection time or overtime on a large order. You repay it monthly over up to 60 months.

Do I give up ownership of my CNC machines?

No. A Five West leaseback is an Equipment Finance Agreement, so ownership never transfers. A lien is filed against the machines you pledge and released when the balance is paid. The machines stay on your books and your floor.

How long does a machine shop leaseback take to fund?

Most applications get a first response within 1 to 2 business hours, and funding follows 2 to 5 business days after signing, once the machines’ value is confirmed. The appraisal is usually the longest step, so send your machine list early.

How much can a machine shop raise with a leaseback?

It depends on what the machines would bring on the resale market and on your credit file, so there’s no set amount before we see the list. An inspection or appraisal sets the final number, and the whole schedule is valued together. For a big order, we suggest raising what the order needs plus a cushion.

Can I pay off a leaseback early when the customer pays?

Yes. Most approvals carry no early payoff penalty. Once the balance is paid, the lien on your machines is released.

Can I pledge machines I still owe money on?

Not in a leaseback. The machines have to be fully paid off with no liens. If there’s a balance owed on them, a refinance may be the better route, so ask us.

Will a leaseback create a tax bill on my machines?

There’s no gain on the machines, because borrowing against them under a Five West Equipment Finance Agreement isn’t a sale, and they stay on your books. For anything else on the tax side, including how the payments are treated, ask your CPA.

Quoting or just won a big order?

Send your machine list with one short application, and one funding professional takes it from there.

This article is general information about using an equipment leaseback for working capital in a machine shop, not tax, legal or accounting advice or a commitment to finance. The order in the worked example is hypothetical, not a Five West customer or deal. Example payments are estimates for an established business with two or more years in business; actual terms and payments depend on credit approval, the equipment and the term. All financing is subject to credit approval and underwriting.

Get a quoteApply