Can a fab shop get working capital from the lasers and press brakes it owns?
Yes. A fab shop that owns its fiber lasers, press brakes, plasma tables or welding cells free and clear can borrow against them with a fabrication equipment leaseback, take a lump sum of working capital, and keep every machine running. Below is how ours works, what usually qualifies on a fab floor, and what the monthly payments look like.
On this page
How does a fabrication equipment leaseback work?
You pledge equipment the shop already owns, we lend against it, and you pay it back monthly. Here’s the order it happens in:
- You send the list. Every machine you own free and clear and want to pledge.
- We value it. The equipment is measured against its resale market and reviewed alongside your credit.
- You get an offer. A lump sum on an Equipment Finance Agreement, repaid monthly over up to 60 months.
- You sign, and the money goes out. A lien is filed against the pledged machines.
- You keep cutting, bending and welding. Once the balance is paid, the lien is released.
If you searched for a sale-leaseback, know that ours isn’t one. Ownership never changes hands. The shop owns the laser on day one, through every payment and after the last one, and the equipment stays on your books the whole time.
On shop machinery, the lien is usually a UCC filing with the state. Our guide to how an equipment leaseback works covers the filing and how it’s cleared at payoff. If an earlier agreement put a blanket lien on everything the shop owns, mention it early and have your attorney read it before you pledge anything.
Why would a fab shop with paid-off machines need cash?
Because the metal gets paid for long before the job does.
On a big job, a fab shop often buys the plate, sheet, tube or bar, goes through wire, gas and consumables, and covers weeks of payroll for welders, fitters and brake operators, all before a single part ships. Then the customer pays on its own schedule, often weeks after delivery. Land three large jobs in one quarter and you can be busier than ever and short on cash in the same month.
Metal prices add to it. The federal Section 232 tariffs on imported steel and aluminum, first set in March 2018, were modified by a proclamation dated April 2, 2026, and adjusted again by one signed June 1, 2026. A material price can move between the day you bid and the day you buy. Our post on fab equipment and material swings goes into that side of it.
Meanwhile, much of what a fab shop is worth often sits on the floor. A paid-off brake or laser usually still has a resale market (our press brake cost guide shows how long brakes hold a price), and a leaseback turns part of that value into cash without moving a thing.
You decide where the money goes. Proceeds are unrestricted, and fab shops can use them for:
- Steel, aluminum and other material for a big order
- Payroll through a slow season
- Mobilizing for a job that pays later
- Paying off more expensive short-term debt
From the operations side, I’d reach for a leaseback when the cash gap has an end you can point to, like a contract that pays on completion or a material buy ahead of a busy stretch.
Which fab shop equipment can you borrow against?
The heavy machines in a fab shop usually fall into categories our leaseback page lists as eligible: machine tools, manufacturing, industrial and materials handling. Every piece has to pass the same two tests. The shop owns it outright with no liens, and it holds value on its own, with a resale market behind it.
| Fab shop equipment | Leaseback collateral? | Notes |
|---|---|---|
| Fiber and CO2 lasers, tube lasers | Usually eligible (machine tools) | Send wattage, bed size, control and serial number. |
| Press brakes and shears | Usually eligible (machine tools) | List the tooling with the brake it goes with. |
| Waterjets and plasma tables | Usually eligible (machine tools, manufacturing) | Include the pump or power source on the same line. |
| Turret punches, ironworkers, plate rolls, saws | Usually eligible (machine tools) | Model and serial for each one. |
| Robotic welding cells and positioners | Usually eligible (manufacturing) | List the robot, controller and positioner on separate lines. |
| Forklifts | Usually eligible (materials handling) | Owned outright, no liens. |
| Delivery trucks, day cabs and trailers the shop owns | Eligible, depending on credit (transportation) | They can go on the same leaseback as the shop’s machines. Class 8 sleepers are excluded. |
| Individual MIG and TIG welders | Ask us | Each piece needs a resale market of its own; list them with the bigger machines. |
| Anything with a loan still on it | Not as a leaseback | A refinance may be the better route. Ask us. |
| Rented gear, leased machines, customer-owned fixtures | No | Only what the shop owns can be pledged. |
Categories from our equipment leaseback, machine tool and manufacturing pages, checked November 19, 2026. Final eligibility depends on the list you send and the valuation.
Our machine tool financing page names press brakes, shears, laser and waterjet cutting, and saws, and our manufacturing page adds plasma tables and welding cells. Three categories are excluded as leaseback collateral across the board: Class 8 sleepers, forestry equipment and commercial printers.
What about an older brake or shear? There is no age limit, though older equipment can be tougher to get done. Condition, the control and the service history all count.
How much can you borrow against a laser or press brake?
There’s no set figure until we see the list. The amount comes from two things: what the equipment would bring on the resale market, and your credit file. An inspection or appraisal sets the final number.
Send everything you’d pledge at once. We value the whole schedule together, so the laser, both brakes, the shear and the welding cell get one answer instead of five separate ones.
Records help. Original invoices, maintenance logs and the control model on each CNC machine usually make the valuation easier, so I’d gather them before the appraisal is scheduled.
What are the monthly payments on a fab shop leaseback?
Here’s what four lump sums could come to for an established shop:
| Lump sum | 36 months | 48 months | 60 months |
|---|---|---|---|
| $75,000 | $2,411 | $1,893 | $1,584 |
| $150,000 | $4,822 | $3,786 | $3,169 |
| $300,000 | $9,645 | $7,573 | $6,337 |
| $400,000 | $12,860 | $10,097 | $8,450 |
Estimates for an established business with two or more years in business, on an Equipment Finance Agreement. Examples, not quotes. Actual payments depend on credit, the equipment and the term.
A shorter term means a bigger payment and less paid in total. On $150,000, the 36-month schedule adds up to about $173,592, and the 60-month one to about $190,140. Pick the payment the shop can carry in a slow month, not just a busy one.
When a big job finally pays, you can pay off the balance early. Most approvals have no early payoff penalty, and the lien comes off when the balance hits zero. Want to see your own numbers? Try them in the Quote Builder; it doesn’t pull credit.
What do you send, and how fast does it fund?
A schedule of what you own free and clear: year, make, model and serial number for each machine, where you have them. An insurance schedule or a depreciation schedule works fine as the list. For a fab shop, I’d add each brake’s tonnage, each laser’s wattage and the control on every CNC machine.
The timeline goes like this:
- First response: typically within 1 to 2 business hours of applying, after a soft credit inquiry.
- Valuation: the third-party appraisal, when the deal needs one, is usually the longest step.
- Funding: 2 to 5 business days after the documents are signed and the value is confirmed.
A ready list is the biggest thing you control here.
When is a leaseback the wrong move for a fab shop?
Here’s when I’d hold off:
- The laser still has a loan on it. Leaseback equipment has to be owned free and clear. If there’s a balance with another lender, a refinance may be the better route, so ask us about that instead.
- The gap closes in days. If a customer check due next week covers it, a payment that runs for years is more than the problem needs.
- The jobs themselves lose money. A new payment won’t fix bids that come in under cost, and we’d rather tell you that up front.
- You’re about to replace the machine. I’d leave a brake or laser you plan to trade in soon off the list, since the lien stays on it until the balance is paid.
Does a leaseback change the taxes on your machines?
Borrowing against equipment under an Equipment Finance Agreement isn’t a sale, so there’s no gain on the equipment, and the machines stay on your books, including any you wrote off under Section 179. How the new payments are treated, and anything else tax-related for your shop, is a question for your CPA. Ask before you commit the money.
Why use Five West for a fab shop leaseback?
Quick answers, one contact, and machines that never leave your floor:
- A fast first answer. You’ll typically hear back within 1 to 2 business hours.
- One contact. A dedicated funding professional handles your file from application to funding, and the team averages about 10 years of experience.
- Straight feedback. If your list won’t support what you need, we’ll say so, and tell you what might work instead.
- Status online. You can check where your application stands from review to funding with your application number.
- No downtime. Nothing gets unbolted, crated or hauled away.
Buying a machine rather than borrowing against the ones you own? The same team handles financing for press brakes, lasers and other fab equipment, new or used. And the equipment leaseback page has the full program details.
Frequently asked questions
Can you do a leaseback on a press brake?
Yes, if the shop owns the brake free and clear. Press brakes fall under machine tools, an eligible leaseback category. You pledge the brake, get a lump sum against its value, keep running it, and the lien is released once the balance is paid.
Can I borrow against a fiber laser my shop owns?
Usually, yes. Laser cutting equipment is on our machine tool list, and a paid-off fiber laser with a resale market can be pledged. Its resale value and your credit file set the amount, and an inspection or appraisal sets the final number.
Do I give up ownership of my machines in a leaseback?
No. A Five West leaseback is an Equipment Finance Agreement, never a sale-leaseback, so ownership never transfers. A lien is filed against the pledged equipment and released when the balance is paid, and the machines stay on your floor and on your books.
How fast does a fabrication equipment leaseback fund?
You’ll typically get a first response within 1 to 2 business hours. Funding comes 2 to 5 business days after signing, once the equipment’s value is confirmed. A third-party appraisal, when needed, is usually the longest step.
Can older fab equipment be used for a leaseback?
Often, yes. There is no age limit, though older equipment can be tougher to get done. Condition, the control, service records and the machine’s resale market all count.
What can a fab shop use leaseback money for?
Proceeds are unrestricted, so a fab shop can use them for material, payroll through a slow season, mobilizing for a job that pays later, or paying off more expensive short-term debt.
Can I do a leaseback on a laser that still has a loan on it?
Not as a leaseback, because the equipment has to be owned free and clear with no liens. If there is still a balance with another lender, a refinance may be the better route, so ask us and we will look at it.
Own your lasers and brakes outright?
Send the list of what you own free and clear with one short application, and one funding professional takes it from there.
This article is general information about equipment leasebacks for metal fabrication and welding businesses, not tax, legal or accounting advice or a commitment to finance. Example payments are estimates for an established business with two or more years in business; actual terms and payments depend on credit approval, the equipment and the structure. All financing is subject to credit approval and underwriting.