How do you finance a commercial embroidery machine?
You can finance a commercial embroidery machine with an equipment finance agreement or a lease, so the machine pays for itself out of monthly orders instead of one big check. Five West pays the dealer or seller, and you make a fixed payment with the machine as collateral. Below: what real buyers paid, what that comes to a month, and how to get a single head over the minimum.
On this page
What embroidery equipment can you finance?
Pretty much everything a production embroidery shop runs on. If you decorate uniforms, team apparel, hats or promo products for paying customers, the machines are business equipment, and we treat them the way we treat other production gear under manufacturing equipment financing. The usual list:
- Single-head commercial machines: one head, for short runs, samples and caps.
- Multi-head machines: two heads and up, for runs of polos, jackets and team orders. Tajima, for one, lists a multi-head model in 2- to 8-head versions.
- Frames and hooping: cap frames, tubular frames, clamp systems and hooping stations.
- Digitizing software: when it’s sold with the machine on the same invoice, it can go on the agreement with the machine. If it’s billed separately, ask us.
- Finishing gear: heat presses for patches and names, and a laser for appliqué or patch cutting, as part of a bigger package.
Some shops add a DTF printer next to the embroidery machines; that can go on the same invoice too. If wide format printing or vinyl is part of your business, our sign shop equipment financing guide covers that side of the shop.
How much does a commercial embroidery machine cost?
In the federal records we checked, from about $13,600 for one machine to just over $50,000 for a multi-machine order. Makers like Tajima send buyers to a local distributor for pricing, so there’s no simple price list. The cleanest numbers we found are what federal agencies actually paid, because those purchases are public record:
| What was bought | Amount paid | Buyer and date |
|---|---|---|
| Embroidery machine from Melco | $13,635 | Department of the Navy, August 2023 |
| Two Melco commercial embroidery machines, with training | $30,371 | Department of Veterans Affairs (Arizona), February 2024 |
| Three commercial embroidery machines with DesignDeck digitizing software | $32,485 | Department of the Air Force (Alaska), September 2024 |
| Sprint 7XL embroidery machine, 18 needles | $33,312 | Defense Logistics Agency, June 2026 |
| Barudan single-head embroidery machines (the record doesn’t give the count) | $50,284 | Department of the Air Force (Colorado), June 2026 |
Prices from public records: federal contract award amounts on USAspending.gov, checked November 17, 2026, rounded to the dollar. Award amounts can include items the record lists, like training or software, and may include shipping.
Two things stand out. First, the spread between machines is wide; head count, needle count, sewing field and the brand all move the price. Second, the buyers that bundled (machines plus software, or machines plus training) bought the whole setup in one purchase, the same way you can put it on one agreement.
Before you sign, ask the dealer for an itemized quote that lists the machine, frames, software, delivery and training separately. It makes underwriting faster and it shows you what you’re paying for.
What’s the monthly payment on an embroidery machine?
Here’s what three of those amounts could come to for an established embroidery business:
| Equipment price | 36 months | 48 months | 60 months |
|---|---|---|---|
| $30,371: two machines with training | $966 | $756 | $630 |
| $33,312: 18-needle Sprint 7XL | $1,059 | $829 | $692 |
| $50,284: single-head machines (Barudan order) | $1,599 | $1,251 | $1,044 |
Estimated payments for a business with two or more years in operation, financing the full amount on an equipment finance agreement with no down payment, before tax and delivery. Your actual payment depends on credit, the equipment and the term.
A way I like to look at it: divide the monthly payment by what you clear on an average decorated piece. If a left-chest logo nets you a few dollars after thread, backing and labor, you can see quickly how many pieces a month cover the machine. New machines can go out as far as 84 months, which lowers the payment further. The Quote Builder lets you try your own amount and term with no credit pull.
Section 179 may let you deduct qualifying equipment in the year it goes into service. Your CPA can tell you how that plays out on your return.
What if one embroidery machine costs less than $15,000?
Pair it with a second machine or finishing gear. Our usual minimum is about $15,000, and it counts on everything bought together on one invoice, so a machine like the $13,635 Melco in the table can go on one agreement once the rest of the setup is on the quote.
A typical package for a growing shop might be the machine, a cap frame kit, a hooping station, the digitizing software and a heat press for patches. Same invoice, one agreement, one payment. If the pieces come from different sellers, ask us before you sign anything and we’ll tell you how it can be set up.
Delivery, installation, training and warranties can be added as well, installation and training on qualifying transactions. How much can go on usually runs around 20% of the equipment amount, depending on credit and collateral. Training matters on these machines. A shop that knows how to hoop, digitize and maintain tension gets far more out of a head than one learning by trial and error.
Should an embroidery shop lease or finance?
For most shops, I’d finance and own. A good commercial head runs for years, and you’ll probably want to sell or trade it when you move up to more heads. An equipment finance agreement puts the machine in your name from day one, with a lien until it’s paid off, on terms of 24 to 84 months.
An equipment lease runs 24 to 60 months with a $1, 10% or fair market value buyout. The fair market value option carries the lowest payment. At the end you can buy the machine at what it’s worth then, extend, upgrade or give it back. That suits a shop that expects to outgrow a small multi-head within a few years.
One catch: if you want to own the embroidery machine and lease the DTF printer, that’s two agreements, one for each structure. The $15,000 minimum still counts on the total.
Can you finance a used embroidery machine?
Yes. Five West finances used and refurbished embroidery machines from dealers, auctions and other shops. There is no age limit, though older equipment can be tougher to get done. Older or used equipment typically gets a shorter term than new.
On a used machine, ask for the things that tell you how hard it’s been run:
- Stitch count: the machine’s own counter, photographed from the control panel.
- Head count and condition: every head working, every needle bar moving, no heads disabled.
- Service history: who serviced it and when, and whether a dealer still supports that model.
- What’s included: frames, cap drivers, software and whether a software license transfers to you.
Buying from another shop that’s closing or upgrading? We run a lien search and pay the seller directly. If the seller still owes on the machine, we pay off their lender at closing so the lien comes off, and the rest goes to the seller. Approvals can come in as little as 30 minutes on a clean file, and funding can follow in as little as 24 to 48 hours after signing, same as a dealer purchase.
With good credit, you usually don’t need a down payment, even on used equipment or a private-party sale. Have an attorney review the bill of sale, and read our guide to checking used equipment for liens before money changes hands.
Can you get cash out of embroidery machines you already own?
Often, yes, with an equipment leaseback, if the machines are serialized multi-heads with real resale value and you own them free and clear. You pledge them as collateral and get a lump sum against their value. They stay on your floor, you keep owning them and keep sewing on them, and the lien is released once the balance is paid. It’s set up as an equipment finance agreement on terms up to 60 months, generally for 600+ credit and two or more years in business, and funds usually go out 2 to 5 business days after signing once the value is confirmed.
What does an embroidery shop need to qualify?
For an established shop, many programs start around a 600 FICO, and two or more years in business opens the most options. Cash flow that covers the payment, the machine you’re buying and how long you’ve been decorating all count alongside the score.
It moves quickly. You’ll typically get a first response within 1 to 2 business hours, approvals can come in as little as 30 minutes on a clean file, and approvals stay open a set time while you settle on the exact machine. One funding professional handles your file from application to funding. If you want a read before you apply, Check eligibility first.
Can you get financing to start an embroidery business?
Yes, selectively, and plenty of good embroidery businesses start in a garage or spare room. For startups, the programs we place these deals with usually look for 700+ personal credit and real experience, like years running machines or digitizing at another shop. Most new businesses make a down payment and need to show cash left in the account after the purchase.
A few things make a startup file stronger. A recognized commercial brand with a dealer nearby for service and training helps, and so does equipment with a resale market. If you’re running the business from home, check local rules for home businesses with an attorney before you sign. Our startup equipment financing guide covers the rest.
Frequently asked questions
Can you finance a single-head embroidery machine?
Yes. If the machine alone is under the usual $15,000 minimum, pair it with a second machine or finishing gear on the same invoice, such as frames, a hooping station, software or a heat press.
Can digitizing software go on the same agreement?
Yes, when it is sold with the machine on the same invoice. If it is billed separately, ask us. Delivery, installation, training and warranties can be added too, installation and training on qualifying transactions.
How long can you finance an embroidery machine?
Equipment finance agreements run 24 to 84 months, and leases run 24 to 60 months with a $1, 10% or fair market value buyout. Used machines typically get a shorter term than new ones.
Do I need a down payment for an embroidery machine?
With good credit, you usually don’t need a down payment, even on used equipment or a private-party sale. A new business usually makes a down payment.
Can I finance a used multi-head machine from another shop?
Yes. Five West runs a lien search, pays the seller directly and pays off the seller’s lender at closing if the machine still has a loan on it. There is no age limit, though older equipment can be tougher to get done.
Can a home-based embroidery business get equipment financing?
Often, yes. An established home-based business is looked at on the same things as any other: credit, time in business and cash flow that covers the payment. A newer one usually needs strong personal credit, real experience on commercial machines, a down payment and cash left over after the purchase.
Ready to price your embroidery machine?
Send the dealer quote or the seller’s details with one short application, and one funding professional takes it from there.
This article is general information about financing commercial embroidery equipment, not tax, legal or accounting advice or a commitment to finance. Prices shown are amounts from public federal purchase records on the date checked, not appraisals or offers. Example payments are estimates for an established business with no down payment; actual terms and payments depend on credit approval, the equipment and the structure. All financing is subject to credit approval and underwriting.